| Category >>
Delay
|
| dynamicEchoFree |
Even when Ratio is set to 1:1, gain reduction detection remains active. Check the commercial version for unlimited ratio range.
Attack – Controls how quickly the compressor reacts when the signal exceeds the threshold.
Release – Controls how quickly compression returns to unity gain after the signal falls below the threshold.
Dynamic Delay Section
The delay engine generates the spatial echo effect and can be dynamically shaped
by the GR (Gain Reduction) Link system
|
|
|
| Category >>
Delay
|
| dynamicEcho |
Ratio – Determines the amount of compression applied when the signal exceeds the threshold. Even when Ratio is set to 1:1, gain reduction detection remains active.
Attack – Controls how quickly the compressor reacts when the signal exceeds the threshold.
Release – Controls how quickly compression returns to unity gain after the signal falls below the threshold.
Dynamic Delay Section
The delay engine generates the spatial echo effect and can be dynamically shaped
by the GR (Gain Reduction) Link system
|
|
|
| Category >>
Distortion
|
| yCompressor |
Features
Threshold – sets the level at which compression starts
Detection (Linear/Logarithmic) – selects how the input signal level is detected
Attack – controls how fast the compressor responds to transients
Release – defines how quickly gain reduction is released
Ratio – determines the amount of compression applied
Stereo – controls stereo channel linking and behavior
Gain – output level compensation
Mix – dry/wet balance for parallel compression
Side Chain – enab
|
|
|
| Category >>
Delay
|
| multiDelayFree |
Requirements:
DAW (VST2 or VST3 host), Windows 32/64bits or MacOS VST2, VST3 and AU
Changelog:
1.1 (2025-06-08)
FIXED: a few incompatibilities
1.0 (2025-06-03)
Initial release
User Manual:
Here you get messages information when go over the knobs with the mouse.
Button to change the input type: stereo or mono.
Set the main delay time.
Sync delay time to your DAW's tempo.
Warp knob: adjust the signal on the right channel relative to the left
|
|
|
| Category >>
Delay
|
| multiDelay |
Requirements:
DAW (VST2 or VST3 host), Windows 32/64bits or MacOS VST2, VST3 and AU
Changelog:
1.1 (2025-06-08)
FIXED: a few incompatibilities
1.0 (2025-06-03)
Initial release
User Manual:
Here you get messages information when go over the knobs with the mouse.
Button to change the input type: stereo or mono.
Set the main delay time.
Sync delay time to your DAW's tempo.
Warp knob: adjust the signal on the right channel relative to the left
|
|
|
| Category >>
Mastering
|
| 3LufsMeter |
Changelog:
1.20 (2026-02-08)
UPDATE: code improved
1.1 (2024-08-13)
UPDATE: code improved to 24dB split frequencies. No longer free.
1.0 (2024-08-10)
Initial release.
User Manual:
Name of the plugin, click on this area to open this presentation page and check this user manual.
Information label: you can get useful informations by hovering with the mouse over the knobs, text of values or boxes
|
|
|
| Category >>
Stereo
|
| eChorus |
easy to use and rich free reverb
pongDelay: simple free ping pong delay
Requirements:
DAW (VST2 or VST3 host), Windows 32/64bits or MacOS VST2, VST3 and AU
Changelog:
1.0 (2024-06-23)
Initial release.
|
|
|
| Category >>
Mastering
|
| loudnessMeterFree |
input the value from the keyboard, then press enter
To reset to the default value: double-click on the knob.
Requirements:
DAW (VST2 or VST3 host), Windows 32/64bits or MacOS VST2, VST3 and AU
Changelog:
1.0 (2024-05-27)
Initial release.
User Manual:
Information label: you can get useful informations by hovering with the mouse over the knobs, text of values or boxes.
Information label contain the difference between target and loudness of the input
|
|
|
| Category >>
Mastering
|
| loudnessMeter |
input the value from the keyboard, then press enter
To reset to the default value: double-click on the knob.
Requirements:
DAW (VST2 or VST3 host), Windows 32/64bits or MacOS VST2, VST3 and AU
Changelog:
1.0 (2024-05-27)
Initial release. On Mac OS this version have resize problems.
User Manual:
Information label: you can get useful informations by hovering with the mouse over the knobs, graph or boxes. For example
|
|
|
| Category >>
Mastering
|
| lufsLimiter |
This advanced functionality allows you to achieve a harmonious balance between groups of instruments, ensuring that they blend seamlessly together in the mix.
Customizable Parameters: Tailor the limiting behavior to suit your specific requirements with adjustable threshold, release time, and other parameters.
Low CPU Usage: Enjoy smooth performance without compromising on processing power, thanks to efficient algorithm implementation.
Applications:
Music Production: Perfect for mastering engineers, producers
|
|
|
| Category >>
Mastering
|
| lufsLimiterFree |
This advanced functionality allows you to achieve a harmonious balance between groups of instruments, ensuring that they blend seamlessly together in the mix.
Customizable Parameters: Tailor the limiting behavior to suit your specific requirements with adjustable threshold, release time, and other parameters.
Low CPU Usage: Enjoy smooth performance without compromising on processing power, thanks to efficient algorithm implementation.
Applications:
Music Production: Perfect for mastering engineers, producers
|
|
|
| Category >>
Therapy
|
| IsochronicAscension |
Windows 32/64bits or MacOS VST2, VST3 and AU
The archive contains the effect and instrument version, use only one according with your needs. There are also two versions for architecture of 32bits and 64bits, use only one of them.
Changelog:
1.0 (2023-10-12)
Initial release
User Manual:
Adjust the value for the isochronic frequency. The isochronic frequency (the difference between left and right) remains constant even though the left and right frequencies are continuously changing.
The lower limit of the frequency range
|
|
|
| Category >>
Therapy
|
| BinauralAscension |
use only one according with your needs. There are also two versions for architecture of 32bits and 64bits, use only one of them.
Changelog:
1.10 (2026-02-28)
UPDATE: code improved
1.0 (2023-09-10)
Initial release
User Manual:
Adjust the value for the binaural frequency. The binaural frequency (the difference between left and right) remains constant even though the left and right frequencies are continuously changing.
The lower limit of the frequency range
|
|
|
| Category >>
Sampler
|
| PluginsMonitor |
Bitwig (without unload), Adobe Audition (without unload), Ardour, VSTHost (x32 and x64) and BrainWaveProducer (x32 and x64)
Not works: Ableton, LMMS
Changelog:
1.1 (2023-08-19)
UPDATE: improved code and added detection of read folders.
1.0 (2023-08-06)
Initial release
User Manual:
A knob for setting the maximum number of logs per plugin.
An information area, activates when hovering the mouse over a specific active button/knob.
Clicking here, you can use the dropdown to select auto-monitoring settings: for all plugins (the quickest option)
|
|
|
| Category >>
Sampler
|
| PluginsMonitorFree |
Cubase, Bitwig (without unload), Adobe Audition (without unload), Ardour, VSTHost (x32 and x64) and BrainWaveProducer (x32 and x64)
Not works: Ableton, LMMS
Changelog:
1.1 (2023-08-19)
UPDATE: improved code and added detection of read folders.
1.0 (2023-08-05)
Initial release
User Manual:
A knob for setting the maximum number of logs per plugin.
An information area, activates when hovering the mouse over a specific active button/knob.
Clicking here, you can use the dropdown to select auto-monitoring settings: for all plugins (the quickest option)
|
|
|
| Category >>
Therapy
|
| binauralBeatsHarmonics |
use only one according with your needs. There are also two versions for architecture of 32bits and 64bits, use only one of them.
Changelog:
1.1 (2023-05-08)
UPDATE: change values by mouse wheel, some incompatibility with Reaper 6 solved.
1.0 (2023-03-29)
Initial release
ol > li {padding-top:9px}
User Manual:
Select what the reference frequency represents: binaural or basic frequency.
Set value for binaural or base frequency. This value will also be the frequency of reference. For example
|
|
|
1 2 next 
|
