| Category >>
Limiter
|
| lufsLimiter |
Film and Video: Maintain balanced audio levels in film and video projects, enhancing dialogue clarity and overall sound design.
Key Features at a Glance:
Input gain, attack and release knob.
Look ahead to prepare the envelope before the lufs peaks appear. Look ahead feature mean delay on input, use it only on master.
Knob to set the size of window meter.
Out limit knob to set the maximum output of track Lufs.
Graphics of input loudness, envelope after attack and release
|
|
|
| Category >>
Limiter
|
| lufsLimiterFree |
Film and Video: Maintain balanced audio levels in film and video projects, enhancing dialogue clarity and overall sound design.
Key Features at a Glance:
Simple switching button for four types of tracks based on the dynamics.
Release knob to correlate with dinamics of track.
Out limit knob to set the maximum output of track Lufs.
Four signal bars.
Two buttons for graphic: lock the data on start playing and reset the data.
Slider to change the attenuation target.
Integrated Lufs information on DAW play case
|
|
|
| Category >>
Therapy
|
| IsochronicAscension |
The high limit of the frequency range.
Adjust the duration/rate for each cycle.
Slider to change the waveform with graphical wave shape.
Slider to adjust the spread of frequencies.
Three slider to adjust the volume per ranges (low, middle and high frequencies). It has an effect only if knob no. 6 is greater than zero. This is not an EQ to not spoil the pure waveform.
Click this button if you want the plugin to generate tones even without pressing DAW play.
Brainwave range frequencies area.
This slider can mix the isochronic beats with simple tones.
Adjust the number of tones
|
|
|
| Category >>
Therapy
|
| BinauralAscension |
The high limit of the frequency range.
Adjust the duration/rate for each cycle.
Slider to change the waveform with graphical wave shape.
Slider to adjust the spread of frequencies.
Three slider to adjust the volume per ranges (low, middle and high frequencies). It has an effect only if knob no. 6 is greater than zero. This is not an EQ to not spoil the pure waveform.
Click this button if you want the plugin to generate tones even without pressing DAW play.
Brainwave range frequencies area.
This can change the binaural pan position and disable the binaural
|
|
|
| Category >>
Sampler
|
| PluginsMonitor |
Ardour, VSTHost (x32 and x64) and BrainWaveProducer (x32 and x64)
Not works: Ableton, LMMS
Changelog:
1.1 (2023-08-19)
UPDATE: improved code and added detection of read folders.
1.0 (2023-08-06)
Initial release
User Manual:
A knob for setting the maximum number of logs per plugin.
An information area, activates when hovering the mouse over a specific active button/knob.
Clicking here, you can use the dropdown to select auto-monitoring settings: for all plugins (the quickest option)
|
|
|
| Category >>
Sampler
|
| PluginsMonitorFree |
Ardour, VSTHost (x32 and x64) and BrainWaveProducer (x32 and x64)
Not works: Ableton, LMMS
Changelog:
1.1 (2023-08-19)
UPDATE: improved code and added detection of read folders.
1.0 (2023-08-05)
Initial release
User Manual:
A knob for setting the maximum number of logs per plugin.
An information area, activates when hovering the mouse over a specific active button/knob.
Clicking here, you can use the dropdown to select auto-monitoring settings: for all plugins (the quickest option)
|
|
|
| Category >>
Therapy
|
| binauralBeatsHarmonics |
ou get messages when go over the knobs with the mouse.
Tips:
Also you can find useful information if you go over the knobs with the mouse.
Value input from keyboard: go over the knob and right click, insert value from keyboard then hit enter.
Set default value: double click on the knob.
|
|
|
| Category >>
Delay
|
| dualReverseDelay |
dualReverseDelay it’s a dual plugin both as two sets of knobs (one per channel) and as two directions: reverse and forward.
Unique and original delay.
Features:
Two sets of knobs (one per channel) .
Stereo enhanced by offset
|
|
|
| Category >>
Sampler
|
| YSampler |
8 (decimal seconds)
loop_mode=no_loop || loop_continuous || loop_sustain
direction=reverse || any word
pan=-80 (-100 left, 100 right)
pan_alternate=yes || any word
Tips:
Value input by key: over to any knob and right click, insert value by key then hit enter
Also click left on the note to change its value by key.
Set default value: double click on the knob
Requirements:
DAW (VST host), Windows 32/64bits or MacOS VST and AU
Changelog:
1.01 (2021-12-05)
FIXED
|
|
|
| Category >>
Sampler
|
| 3Sampler |
100 right)
pan_alternate=yes || any word
Tips:
Remove donate button: donate minimum 5 euro then insert donate key received by email
Value input by key: over to any knob and right click, insert value by key then hit enter
Also click left on the note to change its value by key.
Set default value: double click on the knob
Requirements:
DAW (VST host), Windows 32/64bits or MacOS VST and AU
Changelog:
1.01 (2021-12-05)
FIXED
|
|
|
| Category >>
Delay
|
| sweepDelay |
o over the knob and right click, insert value from keyboard then hit enter.
Set default value: double click on the knob
Requirements:
DAW (VST host), Windows 32/64bits or MacOS VST and AU
Changelog:
1.01 (2021-05-24)
UPDATE: code improved
|
|
|
| Category >>
Distortion
|
| easyGater64 |
Each step can be set as duration but also as volume. Triplet and Dotted mode supported.
Can to set the speed (rate synchronized with host).
Set the length of a cycle.
Attack and Release for each step. You can also set the transition between steps with different volume in the Fade knob
You can change the volume target at the output of an internal filter: Low Gain, High Gain and oscillations between Low and High. You can also set the frequency that split the Low and High frequencies values
You can change the global time for all steps
|
|
|
| Category >>
Distortion
|
| oneSample |
BrainWaveProducer (x32 and x64)
Changelog:
1.1 (2023-07-11)
the playback speed was increased to x9.99.
Tips:
Value input from keyboard: go over the knob and right click, insert value from keyboard then hit enter.
Set default value: double click on the knob
|
|
|
| Category >>
Distortion
|
| easyGater |
Each step can be set as duration but also as volume. Triplet and Dotted mode supported.
Can to set the speed (rate synchronized with host).
Set the length of a cycle.
Attack and Release for each step. You can also set the transition between steps with different volume in the Fade knob
You can change the volume target at the output of an internal filter: Low Gain, High Gain and oscillations between Low and High. You can also set the frequency that split the Low and High frequencies values
You can change the global time for all steps
|
|
|
| Category >>
Filter
|
| twinPhaser |
Value input from keyboard: go over the knob and right click, insert value from keyboard then hit enter.
Set default value: double click on the knob
Requirements:
DAW (VST host), Windows 32/64bits or MacOS VST and AU
Related to free twinCrusher, from our precedent release
|
|
|
| Category >>
Delay
|
| reverseDelay |
Reverse delay with enhanced stereo delay, ping pong and low pass filter. Extremely low resources taken!
Unique and original delay.
Features:
Delay play on alternate left right.
Stereo enhanced by Pan Width knob.
Low pass filter.
Host sync delay rate and free time rate
|
|
|
1 2 3 next 
|
